Nortel BCM200 Installation And Maintenance Manual page 307

Figure 165 MSC mounting screws
13 Use both hands to carefully hold the card along the side edges. Push the card away from the
PCI riser card connector to disconnect the MSC.
14 Remove the MSC from the base function tray. Place the MSC on a flat, clean, and static-free
surface.
15 Remove all processor expansion cards (PEC IIIs) from the MSC (see the procedure
remove the processor expansion card (PEC)" on page
static-free location. Reuse the cards in a replacement MSC (see the procedure
media services card (MSC)" on page
Chapter 24 Replacing data cards and processing hardware
PEC III slots
MSC
308).
BCM200/400 4.0 Installation and Maintenance Guide
MSC mounting screws
Base function tray extension
315). Place the PEC IIIs in a safe,
307
"To
"To install the