Software Keycode - Nortel BCM200 Installation And Maintenance Manual

a If using a terminal emulation program (Hyperterminal), attach a configuration computer to
the BCM main unit serial port (recommended method).
b If you are accessing the BCM main unit through your local area network through SSH
(secure socket shell), use the default IP address 10.10.10.1.
5
When prompted for a User ID, type:
nnadmin
6 When prompted for a Password, type:
PlsChgMe!
7
The Configuration main menu screen appears. Refer to
Figure 93 Configuration main menu screen
8
Enter the number of the parameter you want to configure.

Software keycode

You require a keycode to enable software features on the BCM system. You receive only one
keycode whether you purchase one feature or a bundle of features.
To generate a keycode, you require an authorization code for each feature you purchase.
For example, if you have one feature, you receive one authorization code and you will generate
one keycode. If you purchase four features, you receive four authorization codes, however, you
will still generate only one keycode.
Chapter 13 Initializing the system
Figure 93.
BCM200/400 4.0 Installation and Maintenance Guide
183