Nortel BCM200 Installation And Maintenance Manual page 282

282 Chapter 23 Replacing or upgrading a power supply
Figure 139 Power and hard disk cable routing
Media bay module backplane
P4, P5, P6 power
cable
Power supply
5
Install the I/O card (see
cables. Ensure the cables maintain their position as shown in the previous step.
Figure 140 Install the I/O card in the BCM200 main unit
6 Install the BCM200 MSC bracket (see
N0060612 N0060612
MSC
I/O card
standoffs
MSC
bracket
standoffs
I/O card
standoffs
Fan
Figure 140). The I/O card installs on top of the power supply and IDE
Figure 141).
Tie-wrap location P4, P5, P6 +
hard disk cable 1/2" from
hard disk cable sheathing
IDE (hard
disk) cable
Hard disk
1/2"