Using Element Manager To Set The Basic Parameters - Nortel BCM200 Installation And Maintenance Manual

Chapter 16

Using Element Manager to set the basic parameters

The Element Manager application provides a computer-based client interface that can connect to
devices over an IP network and display the programming interface for that device.
Through Element Manager, you can configure all of the basic parameters, which include:
• "Configuring the initial parameters" on page 197
• "Configuring the startup parameters" on page 200
Refer to the BCM 4.0 Administration Guide for more information on how to use Element Manager.
Figure 96 shows an overview of using Element Manager to set the basic parameters.
Figure 96 Overview of using Element Manager
Chapter 16 Using Element Manager to set the basic parameters
BCM200/400 4.0 Installation and Maintenance Guide
195