To Access The Bcm Web Page; To Download And Install Bcm Element Manager; Prerequisites; Accessing The Bcm System - Nortel BCM200 Installation And Maintenance Manual

196 Chapter 16 Using Element Manager to set the basic parameters

Prerequisites

BCM Element Manager has the following system requirements:
• Windows: Windows 98SE, Windows 2000, Windows XP
• RAM: minimum 256 MB, recommended 512 MB
• free space: 150 MB
• BCM Element Manager access is also supported through a Citrix server

Accessing the BCM system

After your computer is connected to the BCM system, either through an Ethernet crossover cable
or through a LAN connection, you can download BCM Element Manager from the Administrator
Applications area of the BCM web page.

To access the BCM web page

1
Open a web browser and enter the BCM system IP address.
The Enter Network Password dialog box opens.
2 Enter the username and password (defaults are shown below):
Username: nnadmin
Password: PlsChgMe!
3 Click OK.
The Welcome to BCM web page opens.

To download and install BCM Element Manager

1 On the Welcome to BCM web page, click Administrator Applications.
The Administrator Applications page opens.
2 On the Administrator Applications page, click BCM Element Manager.
The BCM Element Manager panel opens.
3
Read the information on this panel.
4 Click Download Element Manager on the right side of the screen, and follow the instructions
to download.
5
After BCM Element Manager has finished downloading, double-click the application and
follow the instructions to install.
N0060612 N0060612