Nortel BCM200 Installation And Maintenance Manual page 287

Figure 145 Fasten the power supply support bracket cables
Place the support
2
bracket on the power
supply
Place power supply upside
1
down on flat surface
6 Insert the standard power supply and support bracket in the main unit. The power supply
support bracket rests on the MSC guide bracket on one side, and the chassis wall on the other.
7
Ensure the mounting holes in the power supply support bracket align with the holes in the
main unit.
8
Fasten the power supply support bracket mounting screws (see
Figure 146 Fasten the power supply support bracket to the main unit
9 Align the mounting holes in the power supply with the chassis holes at the rear of the main
unit. Fasten the power supply mounting screws to the main unit (see
Chapter 23 Replacing or upgrading a power supply
Insert a tie-wrap in
3
the power supply
support bracket
BCM200/400 4.0 Installation and Maintenance Guide
Gather and route the power
4
cables at the tie-wrap
Secure the power cables to the
5
power supply bracket with the
tie-wrap
Figure 146).
Figure 147).
287