MBM installation
To add a media bay module (MBM) to your system, configure the DIP switches
for your MBM and install it into the main unit or expansion cabinet. Each MBM
you add increases the number of public switched telephone network (PSTN)
trunks or extensions that you can connect to the BCM450 system. For more
information about the types and functionality of MBMs, see Business
Communication Manager 450 1.0 Installation—Devices (NN40160-302).
Prerequisites to MBM installation
•
The MBMs are safety-approved for installation into the BCM450 system.
The installer and user must ensure that hardware installation does not
compromise existing safety approvals or local electrical code regulations
for telecommunications equipment and wiring installation.
MBM installation procedures
This task flow shows you the sequence of procedures you perform to install
an MBM in a main unit or an expansion cabinet. To link to any procedure, go
to
MBM installation procedures (page
Copyright © 2006-2009 Nortel Networks
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009
44).