Using The Startup Profile To Configure Parameters - Nortel BCM200 Installation And Maintenance Manual

Chapter 17

Using the Startup Profile to configure parameters

The Startup Profile tool enables an experienced administrator to customize a template with
common BCM parameters. This template is used to quickly configure one or multiple systems.
You create the Startup Profile using the Startup Profile template (a Microsoft Excel template). You
then use a USB storage device to transfer the Startup Profile data to the BCM main unit.
Loading the Startup Profile increases the time for the BCM system to boot depending on the
selected parameters. For example, if you apply a keycode using the Startup Profile, the BCM
system might reboot, which can add up to 30 minutes to the total time. However, if your selected
parameters do not require a reboot, as little as 5 extra minutes are added to the total time for the
system to become operational. If you decide to configure these parameters using Element
Manager, the overall time required for system reboots and applying the parameters are the same.
When the Startup Profile is successfully applied, the BCM system automatically reboots to
complete the system configuration. The Startup Profile is not fully loaded until the system reboots.
Figure 97 shows an overview of using the Startup Profile.
Figure 97 Overview of using the Startup Profile
Chapter 17 Using the Startup Profile to configure parameters
BCM200/400 4.0 Installation and Maintenance Guide
207