Figure 17 Select Components To Install Dialog Box - Nortel BayStack 100-S Install Manual

Note: If you want to install the Instant Internet software to a network
drive at the server that is sharing that network drive, the Install program
will perform a local rather than a network installation. You can use the
install.exe /net
local drive.
2
Click OK.
The Select Components to Install dialog box opens
to install the administration utilities (Setup, Admin, Monitor, Tools, and
AutoLog).

Figure 17 Select Components to Install dialog box

3
Select the Administration Utilities check box to copy the administration
utilities to the network.
Instant Internet is shipped with a workstation preconfiguration file that you
can use to set default installation settings for the other workstations. If you are
going to install many additional workstations or if you want to make sure the
administration utilities are not installed on the workstations, you can set these
installation defaults in the workstation preconfiguration file. For details, refer
to "Automatically configuring workstations during installation" on page
4
Click OK.
The Install program begins installing and copying the files from the CD to the
specified network directory. When the installation is complete, the Instant
Internet Install message box opens.
5
Click Continue to complete the workstation installation.
Installing the BayStack Instant Internet Management Software Version 7.11
Chapter 3 Installing the Instant Internet software 59
command to force a network installation to a
(Figure 17) prompting you
60.