To Create User Accounts - Nortel BCM200 Installation And Maintenance Manual

To create user accounts

1 From the Configuration tab, click the Administrator Access folder to expand it.
2 Select Accounts and Privileges from the Administrator Access folder.
3
Select the View by Accounts tab.
4 Click Add... to add a user account. The Add Account dialog box opens.
5 Configure the Add Account attributes (see
Table 76 Add Account attributes
Attribute
Description
User ID
Password
Telset user ID (numeric)
Telset password (numeric)
Modem Callback Number
Modem Callback Passcode This is the code the system uses to confirm the callback is legitimate.
ISDN Callback Number
ISDN Callback Passcode
Change Password On
Login
Change Password On
Login Telset
6 Click Ok.
7 Repeat steps 4 to 6 to create more user accounts.
Next step
After you set the basic parameters, proceed to
page 213.
Chapter 16 Using Element Manager to set the basic parameters
Table
Description
Enter a description for this account.
Enter a descriptive name for the user or the user function.
Enter a password for this account.
If the user performs administration through the Telset interface, enter a
number for the user ID.
Enter a password for the Telset User ID.
If Callback is required, enter the number to which the system calls back in
order to verify the dial-up user access.
If ISDN Callback is required, enter the number to which the system calls back
in order to verify the dial-up user access.
This is the code the system uses to confirm that the ISDN callback is
legitimate.
Select this checkbox to force the user to change the password upon first login.
Select this checkbox to force the user to change the Telset password upon
first login.
"Completing the initial installation (optional)" on
BCM200/400 4.0 Installation and Maintenance Guide
76).
205