Base Function Tray Component Hardware; Base Function Tray Faceplate Components - Nortel BCM200 Installation And Maintenance Manual

Figure 7 Advanced function tray RAID Status LEDs

Base function tray component hardware

This section describes the following base function tray components:
• "Base function tray faceplate components" on page 39
• "Base function tray internal components" on page 40
• "Main card" on page 43
• "Data networking components" on page 46
• "I/O interface card" on page 48

Base function tray faceplate components

Figure 8 illustrates the base function tray faceplate components.
components.
Figure 8 Base function tray faceplate components
System Status LEDs
Primary
Modem port COM port
(serial port)
Chapter 2 Introducing the BCM hardware
Mirror
Status
Table 5
Reset button
Ethernet
Ethernet
port 1
port 2
BCM200/400 4.0 Installation and Maintenance Guide
Alarm Reset
describes the faceplate
WAN card
MSC
USB port
39