To Customize A Startup Profile For Your System; Configuring Basic Parameters - Nortel BCM200 Installation And Maintenance Manual

5 Click Download Startup Profile Template on the right side of the screen, and follow the
instructions to download.

Configuring basic parameters

To customize a Startup Profile for your system

Note: The Startup Profile template uses macros to perform certain functions. You
must set your Excel macro security level to medium or low to enable the macros:
•
•
•
•
Note: You cannot copy and paste data between cells in the Startup Profile. If you
attempt this, the data validation within the spreadsheet becomes corrupt. If
corruption occurs, download another copy of the Startup Profile template from the
BCM main unit.
1 On a computer that has a USB port and Microsoft Excel, open the Startup Profile template
(Microsoft Excel template).
If you do not have a copy of the Startup Profile template, see
template" on page
2
Refer to the Usage Instructions tab for instructions about using the Startup Profile template.
3 Click the StartupProfileTemplate tab to begin entering information in the Startup Profile
template.
4 Enter your BCM system ID in the System ID field in the Startup Profile template.
The system ID is on the box of the main unit and on the main unit itself. If you enter the wrong
system ID, the Startup Profile will not work with your system.
5 Click the large button at the top of the Startup Profile template to save a version of the Startup
Profile (.sps file) and a version of the Startup Profile editor (Excel spreadsheet) on your
computer.
The filenames for the Startup Profile editor and the Startup Profile consist of the system ID
followed by the appropriate extension.
Note: Never edit the Startup Profile (.sps file) directly; always use the Startup
Profile editor to make changes.
Chapter 17 Using the Startup Profile to configure parameters
From the Tools menu, select Macros, then select Security..., and select
Medium or Low.
Exit from Excel.
Open the Startup Profile template (in Excel).
Enable macros if prompted.
208.
"To download the Startup Profile
BCM200/400 4.0 Installation and Maintenance Guide
209