Power Brick Controller User Manual
Changing Network (IP Address) Settings
Through the Power PMAC IDE
If you want to change Power PMAC's IP Address from within the IDE, click ToolsOptions...
Near the bottom of the screen in the left pane, click PowerPMACNetwork Settings and then the
following window should appear:
On this window, enter the NewIPAddress desired. You can enter this IP Address into the DefGateway
field also. Leave the SubnetMask as 255.255.255.0. Then, click Test and Apply Changes.
Special Functions & Troubleshooting
This area reports messages
and changes from the Options
window
198