Removing And Installing The Slide Valve Body - Skoda FABIA II 2007 Workshop Manual

1.6 Removing and installing the slide valve
body
Special tools and workshop equipment required
♦ Protective goggles
WARNING
Do not run the engine or tow the vehicle when the oil pan has
been removed or without ATF filling.
Note
♦ The slide valve body as well as the wiring looms can be re‐
moved even if the gearbox is installed.
Insert gasket rings with ATF. The use of other lubricants leads
♦
to the malfunction of the gearbox hydraulic control system.
Always replace soiled or faulty slide valve bodies.
♦
Do not use fluffy cloths.
♦
⇒ "2 Information and repair instructions for the automatic gear‐
♦
box 09G", page 12 .
Removing
WARNING
Observe measures when disconnecting and connecting the
battery ⇒ Electrical System; Rep. gr. 27 .
– Disconnect the battery-earth strap with the ignition off ⇒ Elec‐
trical System; Rep. gr. 27 .
– Removing the oil pan
⇒ "1.4 Removing and installing oil pan", page 168
– Removing oil filter
⇒ "1.5 Removing and installing the oil filter", page 170
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
1. Removing and installing oil pan, oil filter, slide valve body and internal wiring looms
Gearbox 09G - Edition 07.2014
.
.
171