Skoda FABIA II 2007 Workshop Manual page 1161

❑ Removing and installing
⇒ "2.9 Removing and installing selector lever control cable, vehicles up to 05.2009 (Octavia II, Superb
II, Yeti)", page 123
❑ testing and adjusting
10 - Gearshift lever
11 - Cable support
❑ for selector lever control cable
12 - Lock washer
❑ when installing, make sure that it locks correctly into place
❑ Replace after disassembly
13 - Nut
❑ 4 pieces
❑ 9 Nm
2.1.2 Summary of components - Gearshift mechanism as of 06.2009 - (Octavia
II, Superb II, Yeti, Rapid NH)
1 - Cover with handle up to
11.2012 (CW 45) (Octavia II,
Superb II, Yeti)
❑ Removing and installing
cover
⇒ "2.5 Removing and In‐
stalling the cover for the
shift mechanism",
page 109
❑ Removing and installing
handle up to 11.2012
(CW 45)
⇒ "2.6 Removing and in‐
stalling handle for shift
mechanism", page 112
❑ As of 11.2012 (CW 45),
the selector handle was
changed, see Pos. 2
❑ for the emergency re‐
lease only the cover
needs to be unclipped
⇒ "2.10 Emergency re‐
lease of gearshift mech‐
anism out of position P",
page 127
❑ the symbol insert and
the circuit board with the
lamp for selector lever
scale illumination -
L101- are integrated in
the cover
2 - Cover with handle as of
11.2012 (CW 45) (Octavia II,
Superb II, Yeti)
❑ Removing and installing
cover
⇒ "2.5 Removing and In‐
stalling the cover for the
shift mechanism", page 109
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
⇒ "2.3 Inspecting and adjusting the selector lever control cable", page 105
Gearbox 0AM-DSG - Edition 01.2015
99
2. Shift mechanism