Skoda FABIA II 2007 Workshop Manual page 1214

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
– Disconnect the wiring loom of the generator, of the lambda
probe after catalytic converter - G130- and of the lambda
probe - G39- from the supports -arrows-.
– Release clamps -1- and -3- on the charge air pipe -4-.
– Unscrew screws -2- from bracket for coolant pipe and remove
bracket.
The charge air pipe is removed subsequently together with the
pre-exhaust pipe.
– Unscrew screws -5- and -7- from the bracket of the pre-ex‐
haust pipe.
– Remove pre-exhaust pipe ⇒ Engine; Rep. gr. 26 .
Continued for all vehicles
– If present, disconnect the electrical plug connection -1- on the
oil level and oil temperature sender - G266- .
– Unclip the wiring loom from the holder -2-.
– If present, remove front left vehicle level sensor - G78- .
152
Rep. gr.34 - Controls, housing