Removing And Installing The Slave Cylinder - Skoda FABIA II 2007 Workshop Manual

1.20 Removing and installing the master cyl‐
inder (Fabia II 2011 ►; Roomster 2011
►; Rapid NH 2013 ►)
Special tools and workshop equipment required
♦ Pliers - T10005-
♦ Polycarbamide grease - G 052 142 A2-
Removing
– Remove bracket with master cylinder:
♦ Fabia II 2011 ►; Roomster 2011 ►; Rapid NH 2013 ►
⇒ page 38 .
♦ Rapid 2011 ► ⇒ page 41
– Unlock the clutch pedal from the master cylinder with the pliers
- T10005- .
– Remove master cylinder from mounting bracket.
Install
– Insert the master cylinder in the bracket.
– The bracket -2- must be located on the actuating rod -1-.
– Press the support -2- into the recess on the clutch pedal -3-
until it clicks audibly into place.
– Install bracket with master cylinder:
♦ Fabia II 2011 ►; Roomster 2011 ►; Rapid NH 2013 ►
⇒ page 38 .
♦ Rapid 2011 ► ⇒ page 41
1.21 Removing and installing the slave cylin‐
der
Special tools and workshop equipment required
♦ Hose clamp - MP7-602 (3094)-
♦ Grease - G 000 100-
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
.
.
Gearbox 02T - Edition 05.2014
61