Transporting An Automatic Gearbox; Attaching Gearbox To Assembly Stand - Skoda FABIA II 2007 Workshop Manual

Torque converter on the driver plate
Component
Torque converter to drive plate, 3 nuts
1)
-arrow-
1)
Replace nuts ⇒ Electronic Catalogue of Original Parts .
All other bolted connections
Component
Screws/nuts
3.4

Transporting an automatic gearbox

Special tools and workshop equipment required
♦ Shackle - 10-222A/12-
Work procedure
For transporting the automatic gearbox, the shackle - 10-222A/
12- can be used.
– Secure torque converter against dropping out when transport‐
ing.
– Attach shackle - 10-222A/12- to gearbox housing.
3.5

Attaching gearbox to assembly stand

Special tools and workshop equipment required
♦ Engine and gearbox mount - MP1-202- (as -VW540- , however
for assembly stand -MP9-101- )
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Tightening torque
57 Nm
M6
M8
M10
M12
Gearbox 09G - Edition 07.2014
Nm
10
20
45
65
3. Removing and installing the gearbox
145