Removing
– Remove the small engaging bearing with the adjusting wash‐
er.
– Remove the large engaging lever.
– Remove screws and remove the small engaging lever with
clamp.
Note
Only some older gearboxes have no clamp.
– Remove the support for the engaging lever.
Installing
The large adjusting washer for the clutch K1 is installed on the
large bearing, the small adjusting washer for the clutch K2 is in‐
stalled under the small bearing.
Caution
Do not oil or grease!
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
35
1. Clutch operation