Skoda FABIA II 2007 Workshop Manual page 1116

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
– Measure the distance to the circlip.
– Note the result and name it B 1 .
Example: Dimension B 1 = 2.62 mm
– Measure the dimension B once more at the opposite point.
– Note the result and name it B 2 .
• Do not measure on the joint of the ring. The ring could be
pressed off from the joint and thus the measuring result will be
inaccurate.
♦ Example: Dimension B 2 = 2.58 mm
– Determine the mean value from both measurement results.
Example:
♦ Dimension B = B 1 +B 2 2 = 2.62+2.582 = 2.60
This dimension B is required for the following calculations.
– Remove the circlip -arrow- again.
• The circlip may not be reused.
Determine dimension -A1- of the large engaging bearing for clutch
K1.
54
Rep. gr.30 - Clutch