Skoda FABIA II 2007 Workshop Manual page 704

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
Note
The drive shafts of the individual gearboxes have different
♦
lengths due to the different heights of the serration, dimension
-a-.
In order to press in the bearing support evenly onto the shafts,
♦
it is necessary that the shafts are also positioned evenly on
the insert base - T10083- .
A 3 mm thick washer - T10083/1- must be inserted in the fas‐
♦
tening opening of the drive shaft, if necessary
Therefore, the dimension -a- of the output shaft serration must
♦
be measured.
• Dimension -a- = 30.6 mm
Insert washer - T10083/1-
Press on the bearing support for grooved ball bearing
– Before pressing on the bearing support heat it to approximate‐
ly 100 °C.
Press on the bushing -A- for the 5th gear needle bearing
142
Rep. gr.35 - Gears, shafts
⇒ page 142 .