Skoda FABIA II 2007 Workshop Manual page 1068

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
The gearbox has an opening in the housing -arrow-.
Vehicles Octavia II, Superb II and Yeti
Note
When installing pay attention that nothing falls into this open‐
♦
ing.
Cover the opening with a cloth before commencing installation
♦
work.
For vehicles Fabia II, Roomster and Rapid NH
Note
This opening is closed with a cap.
♦
When installing pay attention that nothing falls into this open‐
♦
ing.
Continued for all vehicles
♦ If the covers are unscrewed from the gearbox or the gearbox
is without oil, do not let the engine run and do not tow the ve‐
hicle.
♦ Permanently ensure that no dirt can get into the opened gear‐
box.
♦ Thoroughly clean the connection points and their surroundings
and then release.
♦ When installing the gearbox, ensure the dowel sleeves are
correctly located between the engine and gearbox.
On some transmissions, a cover is present above the engaging
lever.
The cover protects against contamination.
Tightening torque securing bolts: 8 Nm
Mechatronics
♦ The mechatronics is allocated according to the gearbox code
letters ⇒ Electronic Catalogue of Original Parts .
♦ The new mechatronics for the gearbox is already precisely fil‐
led with oil at the factory, do not drain the oil.
♦ The removed mechatronics for the gearbox is sent back with
oil (close the ventilation opening with a suitable plug).
♦ During assembly work, remove the cover of the ventilation for
the mechatronics and close the opening with a suitable screw
plug. In case of oil leakage from the mechatronics , the me‐
chatronics must be replaced.
Gear oil
6
Rep. gr.00 - Technical data