Skoda FABIA II 2007 Workshop Manual page 1197

– Fit supporting device -T30099- .
Note
Use only one spindle of the supporting device on 1.2/77 kW en‐
gine.
Continued for all vehicles
– Slightly pre-tension the engine/gearbox unit via the spindles,
do not raise.
– Loosen the front left wheel bolts.
Vehicles with the rigid shafts (up to 11.2008)
– Loosen the front right wheel bolts.
– Raise vehicle.
– Remove right front wheel.
Continued for all vehicles
– Raise vehicle.
– Remove front left wheel.
– Remove the sound dampening system ⇒ Body Work; Rep.
gr. 50 .
– Remove the front left wheelhouse liner ⇒ Body Work; Rep.
gr. 66 .
– Remove the charge air hose from the bottom left charge air
cooler and the charge air pipe ⇒ Engine; Rep. gr. 21 .
– Remove the protective cap for right drive shaft from the engine
-arrows-.
– Remove pendulum support from gearbox, to do so, release
the bolts -arrows B and C-.
Vehicles with 1.2/77 kW engines
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
3. Removing and installing the gearbox
135