– Disconnect the plug connection -A- from the gearshift mech‐
anism.
– Unscrew the screws -arrows- from the shift housing.
Continued for all vehicles
– Remove air filter ⇒ Engine; Rep. gr. 24 or ⇒ Engine; Rep.
gr. 23 .
– Expose the selector lever control cable -A- from the gearbox
shift lever with the removal tool for the inner lining of the door
panel -MP8-602/1- .
– Remove lock washer -arrow- of the selector lever control cable
and leave the selector lever control cable must be left in the
fitting position.
Note
The lock washer -arrow- of the selector lever control cable
♦
must always be replaced ⇒ Electronic Catalogue of Original
Parts .
♦
Do not bend or buckle selector lever control cable.
Do not press the selector lever control cable out of the cable
♦
support towards the rear. The selector lever control cable is
only guided out of the cable support when removing the gear‐
shift mechanism.
– Raise vehicle.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
2. Shift mechanism
119