Skoda FABIA II 2007 Workshop Manual page 1014

WARNING
Wear safety goggles.
– If an ATF temperature of 35 °C is achieved, unscrew the ATF
inspection plug -A-.
– Always replace gasket ring -arrows- for ATF inspection plug
⇒ Electronic Catalogue of Original Parts .
First of all the ATF in the overflow tube -arrow 2- drains off.
If more ATF drips out of the ATF inspection opening (approx. 1
drop per second) via the overflow tube before the ATF has
reached 40°C, the ATF level is correct.
– Fit ATF inspection plug -arrow 1- with a new gasket ring and
tighten to tightening torque
⇒ "1.2 Summary of components - oil pan, oil strainer, slide
valve body, internal wiring looms", page 165
This completes the ATF level inspection.
Note
At the latest at 45 °C (in hot countries 50 °C) the ATF inspection
plug must be closed again.
If no ATF flows out at the ATF inspection opening up to 45 °C, the
ATF must be filled up
– End function "08 - read measured value block".
– Tip "06 - End output".
– Switch off ignition and disconnect the vehicle diagnostic tester.
Fill with ATF
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
.
Gearbox 09G - Edition 07.2014
149
4. ATF