Skoda FABIA II 2007 Workshop Manual page 1249

– Tie up the drive shaft as far as possible. Avoid damaging the
paintwork on the drive shaft during this operation.
– Position the catch pan under the gearbox.
– Unscrew screw for flange shaft with socket insert - T10107A-
or commercially available socket insert 6 mm.
– Take out the flange shaft.
– Remove gasket ring for flange shaft with inertia extractor -
MP9-501 (VW 771)- and extractor - MP3-419/37 (VW
771/37)- .
Installing
– Lightly oil new gasket ring at outer surface.
– Fill half the space between the sealing lip and dust lip with
sealing grease - G 052 128- .
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
1. Replace gasket rings for rigid shafts and flange shafts
187