Skoda FABIA II 2007 Workshop Manual page 1243

– If present, remove front left vehicle level sensor - G78- .
– Unhook the steering joint from the track control arm.
– Press off the left drive shaft from the rigid shaft of the gearbox
e.g with wedge - T10161- or tyre iron ⇒ Chassis; Rep. gr. 40 .
– Tie up the drive shaft as far as possible. Avoid damaging the
paintwork on the drive shaft during this operation.
– Position the catch pan under the gearbox.
– Release the screw in the rigid shaft with the socket insert -
T10107A- or a commercially available 6°mm socket insert.
– Pull out rigid shaft.
– Remove gasket ring for flange shaft with inertia extractor -
MP9-501 (VW 771)- and extractor - MP3-419/37 (VW
771/37)- .
Installing
– Lightly oil new gasket ring at outer surface.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
1. Replace gasket rings for rigid shafts and flange shafts
181