Skoda FABIA II 2007 Workshop Manual page 1169

– Check if the lock washer -arrow- is correctly fitted and secured
towards the bottom.
Note
The lock washer -arrow- must be replaced after each removal ⇒
Electronic Catalogue of Original Parts .
– Slide the selector lever from position P to position S.
– Check the protective cover at the front gearshift mechanism
on the selector lever control cable for damage. The selector
lever control cable must be replaced if damaged.
• Gearshift mechanism and selector lever control cable must
move smoothly when shifting gears. If this is not the case, re‐
place the selector lever control cable or repair the gearshift
mechanism:
♦ ⇒ "2.1 Summary of components - Gearshift mechanism", page
97
Setting
– Shift selector lever in the vehicle to position P.
– Switch off ignition.
– Release screw -arrow-.
Note
If the clamping screw -arrow- is released, the selector lever of the
gearshift mechanism must remain in position P, otherwise the
setting is not correct.
– Set the gearbox gearshift lever to position P. To do so, pushed
the gearshift lever in -direction of arrow- towards the cable
support.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
2. Shift mechanism
107