Skoda FABIA II 2007 Workshop Manual page 1164

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
❑ tighten using hose binding claw - V.A.G 1275-
4 - Centre console
❑ remove it for the removal and installation procedure of the gearshift mechanism
5 - Noise insulation
❑ can only be removed after the removal of the centre console
6 - Gearshift mechanism with selector lever and selector lever control cable
❑ with selector lever lock solenoid - N110-
❑ Emergency release
❑ Removing and installing
⇒ "2.8 Removing and installing shift mechanism with selector lever control cable", page 118
❑ after the installation adjust the selector lever control cable
⇒ "2.3 Inspecting and adjusting the selector lever control cable", page 105
❑ Remove the shift mechanism from the shift housing
7 - Screw
❑ 4 pieces
❑ 8 Nm
8 - Shift housing with gasket
❑ Remove shift housing
9 - Nut
❑ 4 pieces
❑ M6 - 8 Nm
❑ M8 - 25 Nm
10 - Gearshift lever
11 - Cable support
❑ for selector lever control cable
12 - Circlip
❑ Replace after disassembly
13 - Selector lever control cable
❑ The selector lever control cable must not be removed from the gearshift mechanism Pos. 6 and it must
be replaced together with the gearshift mechanism.
❑ Do not grease selector lever control cable
❑ remove from the shift housing and install
❑ testing and adjusting
Remove the shift mechanism together with the selector lever con‐
trol cable from the shift housing
Remove the shift mechanism -A- together with the selector lever
control cable -C- from the shift housing -B- in
-direction of arrow-. To do so, unscrew 4 screws Position 7 from
the shift housing Position 8.
102
Rep. gr.34 - Controls, housing
⇒ "2.10 Emergency release of gearshift mechanism out of position P", page 127
⇒ page 102
⇒ page 102
⇒ "2.3 Inspecting and adjusting the selector lever control cable", page 105
⇒ page 102