Skoda FABIA II 2007 Workshop Manual page 1213

– Position the supporting device - MP9-200 (10-222A)- as
shown.
Position the supporting device - MP9-200 (10-222A)- so that the
supports -A- are located next to screw -arrow 1- and the support
for the front flap -arrow 2-.
• If hose and cable connections are located in the area of the
lifting eye of the engine for the supporting device - MP9-200
(10-222A)- , these must now be removed.
– Slightly pre-tension the engine/gearbox unit via spindles (do
not raise).
– Loosen the wheel bolts and the drive shaft bolts on front left
and front right.
– Raise vehicle.
– Remove both front wheels.
– Remove the sound dampening system ⇒ Body Work; Rep.
gr. 50 .
– Remove the front left wheelhouse liner ⇒ Body Work; Rep.
gr. 66 .
– Unscrew screws -arrow B- and -arrow C- and disconnect the
pendulum support from the gearbox.
Vehicles with 1.2/77 kW engines
– Unhook the plug connections -1-, -2- and -3- from the bottom
bracket at the front of the gearbox and disconnect.
– Remove pre-exhaust pipe with catalytic converter -4- ⇒ En‐
gine; Rep. gr. 26 .
Fabia II vehicles with 1.4/132 kW engines
– Disconnect the two bottom plug connections -arrows- of the
lambda probe - G39- and lambda probe after catalytic con‐
verter - G130- .
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
3. Removing and installing the gearbox
151