Skoda FABIA II 2007 Workshop Manual page 1091

Kick-down switch - F8-
An initialised value of the accelerator pedal position sender -
G79- / accelerator pedal position sender 2 - G185- (integrated in
the accelerator pedal module) is stored as a kick-down signal in
the engine control unit.
Fitting location: Accelerator pedal position sender - G79- / accel‐
erator pedal position sender 2 - G185- -arrow- are located on the
foot controls.
6.1.3 Electric/electronic components and fitting locations of the automatic gear‐
box DSG - 0AM (Rapid)
1 - Diagnostic connection
❑ Fitting location: under
the cover in the driver's
footwell
2 - Selector lever position indi‐
cator - Y6-
❑ Fitting location: Integra‐
ted in the dash panel in‐
sert
❑ a switched off gear dis‐
play points to an emer‐
gency operation with
deactivated gearbox
control unit
❑ a fully lit gear display
points to an emergency
operation with activated
gearbox control unit
❑ can only be replaced to‐
gether with the dash
panel insert ⇒ Electrical
System; Rep. gr. 90
3 - Cover for shift mechanism
with lamp for selector lever
scale illumination - L101-
❑ the lamp for selector lev‐
er scale illumination -
L101- is integrated in
the cover for gearshift
mechanism
❑ is checked by self-diag‐
nosis
❑ Removing and installing
⇒ "2.5 Removing and In‐
stalling the cover for the
shift mechanism",
page 109
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
6. Electrical components
29