Skoda FABIA II 2007 Workshop Manual page 1104

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
ces on the gearbox side and the tolerances in the clutch deter‐
mine the thickness of the adjusting washer.
• The order of work steps must be observed!
Caution
Risk of damage to the clutch as well as to other components.
Bearing of the engaging lever and the entire engaging bearing
mechatronics must be dry and free of oil and grease.
Preparation
– Install the parts of the clutch up to the large engaging lever
⇒ "1.2.1 Removing and installing clutch release mechanism,
version up to 05.2011", page 34
• Do not install the small engaging bearing and do not insert an
adjusting washer.
– Install the circlip of the outer drive shaft -arrow-.
Determine dimension -B-.
42
Rep. gr.30 - Clutch
.