Skoda FABIA II 2007 Workshop Manual page 1100

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
Note
If all the mentioned parts are only removed and reinstalled,
♦
there is nothing to adjust.
The circlip must be replaced under all circumstances.
♦
• Double clutch gearbox removed
⇒ "2.2 Remove double clutch", page 66
• Mechatronics for double clutch gearbox -J743- installed
Removing
– Remove large engaging lever together with the shims and
bearing.
Note
Guide bushing top part cannot be removed or installed individu‐
ally. It is always removed and installed together with the guide
bushing bottom part and small engaging bearing.
– Remove screws and remove the small engaging lever.
If no parts are replaced, the ball pin -2- remains installed.
Note
The hinge bearing -1- cannot be removed.
Installing
The large adjusting washer for the clutch K1 is inserted with the
semispherical side downwards on the large bearing, the small
adjusting washer for the clutch K2 is inserted under the small
bearing.
Caution
Do not oil or grease!
38
Rep. gr.30 - Clutch