Skoda FABIA II 2007 Workshop Manual page 1138

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
– Screw in gasket ring extractor for shaft seals - T10420- without
spindle into the small inner shaft sealing ring.
While doing so, press onto the gasket ring extractor for shaft seals
- T10420- .
• Screw sealing ring extractor for shaft sealing ring - T10420- in
until the sealing ring begins to turn in its bearing.
– Next, screw the spindle back into the gasket ring extractor for
shaft seals . If necessary, hold the outer drive shaft while doing
so.
– Remove the shaft seal using the screws on the spindle.
– Drive in the new shaft sealing ring up to the stop of the thrust
piece - T10421- .
Depth of installation of the gasket ring: 17.5 ± 0.2 mm
– Install the clutch release mechanism
⇒ "1.2 Removing and installing clutch release mechanism",
page 34 .
– Install double clutch
76
Rep. gr.30 - Clutch
⇒ "2.3 Install double clutch", page 69 .