Skoda FABIA II 2007 Workshop Manual page 1177

– Open the warm-type clamp below the handle -arrow-.
– Detach the selector lever handle -1- together with the selector
lever collar from the selector lever towards the top -arrow A-
so that the lock button -2- is not pressed in.
Note
Ignore -arrow B-.
Installing
Installation is performed in the reverse order, pay attention to the
following points:
• The lock button -2- is located in direction of travel.
Caution
The shift mechanism can be damaged.
♦ The lock button at the selector lever handle can protrude
when installing. If the lock button is inadvertently pressed
in when removing the selector lever handle, it must be re‐
positioned
⇒ "2.7 Installing the lock button at the selector lever han‐
dle", page 116 .
♦ If the selector lever handle is installed with the lock button
pressed in, then the selector lever handle as well as the
selector lever control cable can be destroyed.
– Press the selector lever handle -1- onto the selector lever in
-direction of arrow B- in such a way that the lock button -2- is
not touched.
• The selector lever handle must latch into the round slot of the
selector lever.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
2. Shift mechanism
115