Skoda FABIA II 2007 Workshop Manual page 1093

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
Gearbox input r.p.m. sender - G182-
Fitting location: The gearbox input speed sender - G182- is clip‐
ped onto the front of the gearbox housing. Release the sender for
removal and pull out in -direction of arrow-.
The gearbox input r.p.m. sender - G182- can only be replaced
together with the mechatronics for double clutch gearbox - J743-
⇒ "1 Mechatronics for double clutch gearbox J743 ", page 77 .
Selector lever - E313- with Tiptronic switch - F189- , selector lever
sensor control unit - J587- , selector lever switch locked in P -
F319- and selector lever lock solenoid - N110-
Fitting location: Is integrated firmly in the gearshift mechanism
and cannot be replaced separately.
Removal and installation is only possible together with the gear‐
shift mechanism
⇒ "2.8 Removing and installing shift mechanism with selector lev‐
er control cable", page 118
Brake light switch - F- and brake pedal switch - F47-
Fitting location: The brake light switch - F- and brake pedal switch
- F47- -3- is located on the master brake cylinder -4-.
Kick-down switch - F8-
An initialised value of the accelerator pedal position sender -
G79- / accelerator pedal position sender 2 - G185- (integrated in
the accelerator pedal module) is stored as a kick-down signal in
the engine control unit.
Fitting location: The accelerator pedal position sender - G79- /
accelerator pedal position sender 2 - G185- -arrow- are located
on the foot controls.
31
6. Electrical components