Skoda FABIA II 2007 Workshop Manual page 787

FABIA II 2007 ➤
Gearbox 02T - Edition 12.06
Removing and installing circlip
– When removing and installing the circlip -A- pull the gearshift
lever in the -direction of the arrow A- while simultaneously
pressing the spring down with a screwdriver up to the stop in
the -direction of the arrow B-.
Note
Mounting slot in shift lever for circlip must be visible.
♦
Release spring carefully.
♦
Removing and installing damping -arrow-
– Press the pressure spring arm -A- as far as possible to the left
until it is located outside the damping -arrow-.
– Press the shift lever to the lift and pull off the damping.
• After installing the damping, the pressure spring arms -A- and
-B- must rest on the damping -Pfeil-.
60
Rep. Gr.34 - Control, housing