Vlan Configuration - ZyXEL Communications GS1350 Series User Manual

Advanced Application > VLAN > VLAN Detail
Fig ure 99
The following table describes the labels in this screen.
Table 48 Advanced Application > VLAN > VLAN Detail
L ABEL
VLAN Status
VID
Port Number
Elapsed Time
Status
9.3 VL AN C o nfig ura tio n
Use this screen to view IEEE 802.1Q VLAN parameters for the Switch. Click
>
VL AN C o nfig ura tio n
Fig ure 100
The following table describes the labels in the above screen.
Table 49 Advanced Application > VLAN > VLAN Configuration
L ABEL
Static VLAN Setup
VLAN Port Setup
Voice VLAN Setup
MAC Based VLAN Setup
Vendor ID Based VLAN
Setup
DESC RIPT IO N
Click this to go to the
This is the VLAN identification number that was configured in the corresponding VLAN
configuration screen.
This column displays the ports that are participating in a VLAN. A tagged port is marked as
untagged port is marked as
This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
This field shows how this VLAN was added to the Switch.
: added as a permanent entry.
Sta tic
to see the following screen.
Advanced Application > VLAN > VLAN Configuration
DESC RIPT IO N
Click
C lic k He re
Click
C lic k He re
Click
C lic k He re
Click
C lic k He re
Click
C lic k He re
GS1350 Series User's Guide
Chapter 9 VLAN
screen.
VL AN Sta tus
and ports not participating in a VLAN are marked as "
U
to configure the Static VLAN for the Switch.
to configure the VLAN Port for the Switch.
to configure the Voice VLAN for the Switch.
to configure the MAC Based VLAN for the Switch.
to configure the Vendor ID Based VLAN for the Switch.
125
".
–
>
Adva nc e d Applic a tio n
, an
T
VL AN