ZyXEL Communications GS1350 Series User Manual page 326

Table 163 Summary > Neighbor Detail (continued)
L ABEL DESC RIPT IO N
Action Click the
warning message "
prompting you to confirm the action.
•
•
•
Location This shows the geographic location of the neighbor device. This field will show "
devices that do not support the ZON utility.
Desc. This shows the description of the neighbor device's port which is connected to the Switch.
Firmware This shows the firmware version of the neighbor device. This field will show "
that do not support the ZON utility.
MAC This shows the MAC address of the neighbor device.
Device Type This field displays the IP-based security products, for example IP camera or NVR (network
video recorder), that is connected to this Switch.
Flush Click the
ports.
Chapter 45 Surveillance Mode
button to reset the neighboring device to its factory default settings. A
De fa ult
Are yo u sure yo u wa nt to re se t the AP to fa c to ry de fa ult?
The Switch must support power sourcing (PSE) or the network device is a powered
device (PD).
If multiple neighbor devices use the same port, the
You can only reset Zyxel powered devices that support the ZON utility.
button to remove information about neighbors learned on the selected
Flush
GS1350 Series User's Guide
326
" appears
button is not available.
De fa ult
" for
- -
" for devices
- -