ZyXEL Communications GS1350 Series User Manual page 45

6
Select the Web Configurator in
installation. Or select the Web Configurator in
designed for users who are mostly using the Switch for configuring and managing PoE devices like IP
cameras (Chapter 45 on page
7
The screen will appear after selecting the mode. You can use the
Se tup Wiza rd
configure the Switch's IP, login password, SNMP community, link aggregation, and so on. See
on page 51 for more information on the
you can click the
Apply & Sa ve
into the Switch's non-volatile memory at once. Check the screens to see if the settings are applied.
Note: Once you click the
screen will overwrite the existing settings.
Otherwise, click the
Exit
& Sa ve if you do not want the
Apply
to open the
Se tup Wiza rd
Configurator.
Web Configurator: Wizard
Fig ure 29
8
If you did not change the default administrator password and/or SNMP community values, a warning
screen displays each time you log into the Web Configurator. Click
where you can change the administrator and SNMP passwords simultaneously. Otherwise, click
to close it.
Chapter 4 Web Configurator
that has a complete set of configuration for network
Sta nda rd Mo de
Surve illa nc e Mo de
322).
Se tup Wiza rd
button to make the settings take effect, and save your configuration
button, the settings configured in the
Apply & Sa ve
button. You can select the
Se tup Wiza rd
screen later, click the
Wiza rd
GS1350 Series User's Guide
45
that has a set of menus specifically
screen. When you finish configuring the settings,
Ig no re this wiza rd ne xt tim e
screen to appear the next time you log in. If you want
icon in the upper right hand corner of the Web
Pa sswo rd / SNMP
screen to
Se tup Wiza rd
Section 4.4
Wiza rd
Se tup
check box and click
to open a screen
Ig no re