Create A Vlan - ZyXEL Communications GS1350 Series User Manual

Tutorial: DHCP Relay Scenario
Fig ure 59
6.3.2 C re a te a VL AN
Follow the steps below to configure port 2 as a member of VLAN 102.
1
Access the Web Configurator through the Switch's management port.
2
Go to
Ba sic Se tting
the run-time memory.
Tutorial: Set VLAN Type to 802.1Q
Fig ure 60
3
Click
Adva nc e d Applic a tio n
4
In the
Sta tic VL AN
field and enter 102 in the
5
Select
Fixe d
6
Clear the
T X T a g g ing
7
Click to save the settings to the run-time memory. Settings in the run-time memory are lost when the
Add
Switch's power is turned off.
> and set the VLAN type to
Switc h Se tup
>
VL AN
screen, select
AC T IVE
VL AN G ro up ID
to configure port 2 to be a permanent member of this VLAN.
check box to set the Switch to remove VLAN tags before sending.
GS1350 Series User's Guide
802.1Q
> >
VL AN C o nfig ura tio n Sta tic VL AN Se tup
, enter a descriptive name (VLAN 102 for example) in the
field.
78
. Click to save the settings to
Apply
.
Na m e