Configure Dhcpv4 Vlan Port - ZyXEL Communications GS1350 Series User Manual

Gbe layer 2 poe switch
Hide thumbs Also See for GS1350 Series:
Table of Contents

Advertisement

Table 120 IP Application > DHCP > DHCPv4 > VLAN (continued)
L ABEL
Delete
Cancel
31.4.7 C o nfig ure DHC Pv4 VL AN Po rt
Use this screen to apply a different DHCP option 82 profile to certain ports in a VLAN. To open this screen,
click
IP Applic a tio n
Fig ure 184
The following table describes the labels in this screen.
Table 121 IP Application > DHCP > DHCPv4 > VLAN > Port
L ABEL
VID
Port
Option 82 Profile
Add
Cancel
Clear
Index
VID
Port
DESC RIPT IO N
Select the configuration entries you want to remove and click
Click
to clear the check boxes.
C a nc e l
>
>
DHC P
DHC Pv4
IP Application > DHCP > DHCPv4 > VLAN > Port
DESC RIPT IO N
Enter the ID number of the VLAN you want to configure here.
Enter the number of ports to which you want to apply the specified DHCP option 82 profile.
You can enter multiple ports separated by (no space) comma (,) or hyphen (–). For example,
enter "3–5" for ports 3, 4, and 5. Enter "3,5,7" for ports 3, 5, and 7.
Select a pre-defined DHCP option 82 profile that the Switch applies to the specified ports in this
VLAN. The Switch adds the Circuit ID sub-option and/or Remote ID sub-option specified in the
profile to DHCP requests that it relays to a DHCP server.
The profile you select here has priority over the one you select in the
screen.
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the
to the non-volatile memory when you are done configuring.
Click this to reset the values above based on the last selected entry or, if not applicable, to
clear the fields above.
Click
to reset the fields to the factory defaults.
C le a r
This field displays a sequential number for each entry. Click an index number to change the
settings.
This field displays the VLAN to which the ports belongs.
This field displays the ports to which the Switch applies the settings.
GS1350 Series User's Guide
Chapter 31 DHCP
>
>
.
VL AN
Po rt
link on the top navigation panel to save your changes
Sa ve
249
to remove them.
De le te
>
>
DHC P
DHC Pv4
VL A N

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs1350-6hpGs1350-12hpGs1350-18hpGs1350-26hp

Table of Contents