ZyXEL Communications GS1350 Series User Manual page 396

Unspe c ifie d Addre ss
An unspecified address (0:0:0:0:0:0:0:0 or ::) is used as the source address when a device does not have
its own address. It is similar to "0.0.0.0" in IPv4.
L o o pb a c k Addre ss
A loopback address (0:0:0:0:0:0:0:1 or ::1) allows a host to send packets to itself. It is similar to "127.0.0.1"
in IPv4.
Multic a st Addre ss
In IPv6, multicast addresses provide the same functionality as IPv4 broadcast addresses. Broadcasting is
not supported in IPv6. A multicast address allows a host to send packets to all hosts in a multicast group.
Multicast scope allows you to determine the size of the multicast group. A multicast address has a
predefined prefix of ff00::/8. The following table describes some of the predefined multicast addresses.
Table 198 Predefined Multicast Address
MUL T IC AST ADDRESS
FF01:0:0:0:0:0:0:1
FF01:0:0:0:0:0:0:2
FF02:0:0:0:0:0:0:1
FF02:0:0:0:0:0:0:2
FF05:0:0:0:0:0:0:2
FF05:0:0:0:0:0:1:3
The following table describes the multicast addresses which are reserved and cannot be assigned to a
multicast group.
Table 199 Reserved Multicast Address
MUL T IC AST ADDRESS
FF00:0:0:0:0:0:0:0
FF01:0:0:0:0:0:0:0
FF02:0:0:0:0:0:0:0
FF03:0:0:0:0:0:0:0
FF04:0:0:0:0:0:0:0
FF05:0:0:0:0:0:0:0
FF06:0:0:0:0:0:0:0
FF07:0:0:0:0:0:0:0
FF08:0:0:0:0:0:0:0
FF09:0:0:0:0:0:0:0
FF0A:0:0:0:0:0:0:0
FF0B:0:0:0:0:0:0:0
FF0C:0:0:0:0:0:0:0
FF0D:0:0:0:0:0:0:0
FF0E:0:0:0:0:0:0:0
FF0F:0:0:0:0:0:0:0
Appendix C IPv6
DESC RIPT IO N
All hosts on a local node.
All routers on a local node.
All hosts on a local connected link.
All routers on a local connected link.
All routers on a local site.
All DHCP severs on a local site.
GS1350 Series User's Guide
396