ZyXEL Communications GS1350 Series User Manual page 169

Table 73 Advanced Application > Queuing Method (continued)
L ABEL DESC RIPT IO N
Method Select (Strictly Priority Queuing),
SPQ
Strictly Priority Queuing services queues based on priority only. When the highest priority queue
empties, traffic on the next highest-priority queue begins. Q7 has the highest priority and Q0 the
lowest.
Weighted Fair Queuing is used to guarantee each queue's minimum bandwidth based on their
bandwidth portion (weight) (the number you configure in the
weights get more guaranteed bandwidth than queues with smaller weights.
Weighted Round Robin Scheduling services queues on a rotating basis based on their queue weight
(the number you configure in the queue
than queues with smaller weights.
Weight When you select
traffic queues according to their weights.
Hybrid-SPQ This field is applicable only when you select
Lowest-
Select a queue (
Queue
including the specified queue for the port. For example, if you select
, and
Q 5 Q 6 Q 7
Select to always use
No ne
Apply Click to save your changes to the Switch's run-time memory. The Switch loses these changes if
Apply
it is turned off or loses power, so use the
the non-volatile memory when you are done configuring.
Cancel Click
C a nc e l
Chapter 20 Queuing Method
WFQ
We ig ht
or enter the queue weight here. Bandwidth is divided across the different
WFQ WRR
to ) to have the Switch use
Q 0 Q 7
using .
SPQ
or for the port.
WFQ WRR
Sa ve
to begin configuring this screen afresh.
GS1350 Series User's Guide
169
(Weighted Fair Queuing) or
We ig ht
field). Queues with larger weights get more service
or .
WFQ WRR
to service the subsequent queues after and
SPQ
Q 5
link on the top navigation panel to save your changes to
(Weighted Round Robin).
WRR
field). Queues with larger
, the Switch services traffic on