Onvif - ZyXEL Communications GS1350 Series User Manual

Table 182 Networking > IP Setup (continued)
L ABEL
Index
Domain
Name Server
Add
Edit
Delete
Management IP Address
Use these fields to set the settings for the management port.
Index
IP Address
IP Subnet
Mask
VID
Default
Gateway
Add
Edit
Delete
50.3 O NVIF
When ONVIF is enabled and configured, the Switch can obtain the ONVIF security device's information
such as system name and IP address. This lets you to know which IP-based security products, for example
IP camera or NVR (network video recorder), is connected to the Switch.
Use the
O NVIF
Fig ure 268
Chapter 50 Networking
DESC RIPT IO N
This field displays the index number of an entry.
This field displays the IP address of the DNS server.
Click this button to create a new IP address for the DNS server.
Click this button to configure the IP address of the DNS server.
Click this button to remove the IP address of the DNS server.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
This field displays the index number of an entry.
This field displays IP address of the Switch in the IP domain.
This field displays the subnet mask of the Switch in the IP domain.
This field displays the VLAN identification number of the IP domain on the Switch.
This field displays the IP address of the default outgoing gateway in dotted decimal notation.
Click this button to create new settings for the management port.
Click this button to configure the settings for the management port.
Click this button to remove the settings for the management port.
screen to enable the ONVIF protocol on the Switch.
Networking > ONVIF
GS1350 Series User's Guide
362