ZyXEL Communications GS1350 Series User Manual page 359

Table 181 Switching > VLAN > VLAN Port Setting (continued)
L ABEL DESC RIPT IO N
Isolation Select this to allows this port to communicate only with the CPU management port and the
ports on which the isolation feature is NOT enabled.
Apply Click
Apply
changes if it is turned off or loses power, so use the
save your changes to the non-volatile memory when you are done configuring.
Cancel Click
C a nc e l
Chapter 49 Switching
to save your changes to the Switch's run-time memory. The Switch loses these
to begin configuring this screen afresh.
GS1350 Series User's Guide
359
link on the top navigation panel to
Sa ve