ZyXEL Communications GS1350 Series User Manual page 63

Table 17 Navigation Panel Links (Standard Mode) (continued)
L INK DESC RIPT IO N
Cloud This screen displays a link to a screen where you can enable or disable the
Management
C e nte r Disc o ve ry
Control Center). Another link takes you to the
QR code containing the Switch's serial number and MAC address for handy registration of the
Switch at NCC.
Advanced Application
VLAN This link takes you to screens where you can configure port-based or 802.1Q VLAN (depending
on what you configured in the
MAC based VLAN or a vendor ID based VLAN in these screens.
Static MAC This link takes you to a screen where you can configure static MAC addresses for a port. These
Forwarding static MAC addresses do not age out.
This link takes you to a screen where you can configure static multicast MAC addresses for
Static Multicast
Forwarding ports. These static multicast MAC addresses do not age out.
Filtering This link takes you to a screen to set up filtering rules.
Spanning Tree This link takes you to screens where you can configure the RSTP to prevent network loops.
Protocol
Bandwidth This link takes you to a screen where you can configure bandwidth limits on the Switch.
Control
Broadcast Storm This link takes you to a screen to set up broadcast filters.
Control
Mirroring This link takes you to screens where you can copy traffic from one port or ports to another port
in order that you can examine the traffic from the first port without interference.
Link Aggregation This link takes you to screens where you can logically aggregate physical links to form one
logical, higher-bandwidth link.
Port Security This link takes you to a screen where you can activate MAC address learning and set the
maximum number of MAC addresses to learn on a port.
Time Range This link takes you to a screen where you can define different schedules.
Queuing Method This link takes you to a screen where you can configure queuing with associated queue
weights for each port.
Multicast This link takes you to screens where you can configure various multicast features and IGMP
snooping.
AAA This link takes you to a screen where you can configure authentication, authorization and
accounting services via external servers. The external servers should be RADIUS (Remote
Authentication Dial-In User Service).
DHCP Snooping This link takes you to screens where you can configure filtering of unauthorized DHCP packets in
your network.
Loop Guard This link takes you to a screen where you can configure protection against network loops that
occur on the edge of your network.
Errdisable This link takes you to screens where you can view errdisable status and configure errdisable
settings in CPU protection, errdisable detect, and errdisable recovery.
Green Ethernet This link takes you to a screen where you can configure green Ethernet settings in EEE, auto
power down, and short reach for each port.
LLDP This link takes you to screens where you can configure LLDP settings.
Auto PD This link takes you to a screen where you can enable and configure Auto PD Recovery on the
Recovery Switch.
ONVIF This link takes you to a screen where you can configure a specific VLAN to run ONVIF.
IP Application
DiffServ This link takes you to screens where you can enable DiffServ, configure marking rules and set
DSCP-to-IEEE802.1p mappings.
Chapter 4 Web Configurator
feature. If it is enabled, you can have the Switch search for the NCC (Nebula
Switc h Se tup
GS1350 Series User's Guide
63
Ne b ula Switc h Re g istra tio n
menu). You can also configure a voice VLAN, a
Ne b ula C o ntro l
screen which has a