Vlan Configuration - ZyXEL Communications RGS Series User Manual

5.3.36 VLAN Configuration

Each page shows up to 9999 entries from the VLAN table, default being 20, selected through the "entries per
page" input field. When first visited, the web page will show the first 20 entries from the beginning of the VLAN
Table. The first displayed will be the one with the lowest VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table. Clicking the button will
update the displayed table starting from that or the closest next VLAN Table match. The will use the next entry of
the currently displayed VLAN entry as a basis for the next lookup. When the end is reached the warning
message is shown in the displayed table. Use the button to start over.
Specify ARP Inspection is enabled on which VLANs. First, you have to enable the port setting on Port mode configuration
web page. Only when both Global Mode and Port Mode on a given port are enabled, ARP Inspection is enabled on this given
port. Second, you can specify which VLAN will be inspected on VLAN mode configuration web page. The log type also can
be configured on per VLAN setting.
Possible types are:
None: Log nothing.
Deny: Log denied entries.
Permit: Log permitted entries.
ALL: Log all entries
94
Buttons
Click to apply changes.
Click to undo any changes made locally and revert to previously saved values.
Click to add a new VLAN to the ARP Inspection VLAN table.