ZyXEL Communications GS1350 Series User Manual page 280

Encryption protects the contents of the SNMP messages. When the contents of the SNMP messages are
encrypted, only the intended recipients can read them.
Suppo rte d MIBs
MIBs let administrators collect statistics and monitor status and performance.
The Switch supports the following MIBs:
• SNMP MIB II (RFC 1213)
• RFC 1157 SNMP v1
• RFC 1493 Bridge MIBs
• RFC 1643 Ethernet MIBs
• RFC 1155 SMI
• RFC 2674 SNMPv2, SNMPv2c
• RFC 1757 RMON
• SNMPv2, SNMPv2c or later version, compliant with RFC 2011 SNMPv2 MIB for IP, RFC 2012 SNMPv2 MIB
for TCP, RFC 2013 SNMPv2 MIB for UDP
SNMP T ra ps
The Switch sends traps to an SNMP manager when an event occurs. The following tables outline the
SNMP traps by category.
An OID (Object ID) that begins with "
standard MIB OID.
Table 140 SNMP System Traps
O PT IO N O BJEC T L ABEL
coldstart coldStart
warmstart warmStart
fanspeed zyHwMonitorFanSpeedOutO
fRange
zyHwMonitorFANSpeedOut
OfRangeRecovered
temperature zyHwMonitorTemperatureOu
tOfRange
zyHwMonitorTemperatureOu
tOfRangeRecovered
Chapter 34 Access Control
1.3.6.1.4.1.890.1.15
O BJEC T ID
1.3.6.1.6.3.1.1.5.1
1.3.6.1.6.3.1.1.5.2
1.3.6.1.4.1.890.1.15.3.26.2.1
1.3.6.1.4.1.890.1.15.3.26.2.6
1.3.6.1.4.1.890.1.15.3.26.2.2
1.3.6.1.4.1.890.1.15.3.26.2.7
GS1350 Series User's Guide
280
" is defined in private MIBs. Otherwise, it is a
DESC RIPT IO N
This trap is sent when the Switch is turned
on.
This trap is sent when the Switch restarts.
This trap is sent when the fan speed goes
above or below the normal operating
range.
This trap is sent when the fan speed is
recovered from the out of range to normal
operating range.
This trap is sent when the temperature goes
above or below the normal operating
range.
This trap is sent when the temperature is
recovered from the out of range to normal
operating range.