General Setup - ZyXEL Communications GS1350 Series User Manual

The following table describes the labels in this screen.
Table 165 System > System Info
L ABEL
System Name
Product Model
ZyNOS F/W
Version
Ethernet
Address
CPU Utilization
Current (%)
Memory
Utilization
Name
Total (byte)
Used (byte)
Utilization
(%)
Hardware Monitor
Temperature
Unit
Temperature
(C)
Status
Current
MAX
MIN
Threshold
47.3 G e ne ra l Se tup
Use this screen to configure general settings such as the system name and time. Click
in the navigation panel to display the screen as shown.
Se tup
Chapter 47 System
DESC RIPT IO N
This field displays the descriptive name of the Switch for identification purposes.
This field displays the product model of the Switch. Use this information when searching for
firmware upgrade or looking for other support information in the website.
This field displays the version number of the Switch 's current firmware including the date created.
This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
CPU utilization quantifies how busy the system is.
CPU utilization.
Memory utilization shows how much DRAM memory is available and in use. It also displays the
current percentage of memory utilization.
This field displays the name of memory pool.
This field displays the total number of bytes in this memory pool.
This field displays the number of bytes being used in this memory pool.
This field displays the percentage (%) of memory being used in this memory pool.
The Switch has temperature sensors that are capable of detecting and reporting if the
temperature rises above the threshold. You may choose the temperature unit (Centigrade or
Fahrenheit) in this field.
refers to the location of the temperature sensor on the Switch printed circuit board.
C PU/ MAC
This field displays for temperatures below the threshold and
No rm a l
This shows the current temperature at this sensor.
This field displays the maximum temperature measured at this sensor.
This field displays the minimum temperature measured at this sensor.
This field displays the upper temperature limit at this sensor.
GS1350 Series User's Guide
C urre nt (% )
329
displays the current percentage of
for those above.
Erro r
>
Syste m G e ne ra l